Years of R&D and production

Obtain CE,ROHS and many patents

Guangzhou Owleye Optoelectronic Technology Co.,Ltd.
电话小图标 Service hotline: 020-39218706

PC Solar road stud

Your position: Home > Products > Solar Road Stud

PC Solar road stud

PC Solar road stud

Item No.:SRSP1

Description:

Emit light actively and reflect light passively making stronger visual impact feeling.Easy install,can install on the road or fix on the wall


  • Content
  • Specification
  • Advantage
  • Comparison
  • Installation
  • Application
  • Purchase

Product introduction:

Solar road stud is one of the road studs,usually installed follow the road marking line, is used for indicating the road direction at night or rainy or foggy days.It is composed of shell , reflector,solar panel, LED and circuit board and so on.

It flash or be steady light at night actively, doesn’t depend on car light,make more longer visible distance,more clear visual feeling to driver,make driving more safe.


Size: 100*82*20mm

Colour: Red/Yellow/White/Blue/Green

Light mode: Flash or Constant light

Auto-light control: 300--900lux

Full charge time: 12hours (under 100,000lux)

Working time: Flash > 120h, Constant>120h

Water-proof: IP68

Using temperature:-20℃~80℃

Load-bearing: >120kN

Visual distance: >800meters

Warranty: 1 year

Service life: 3--5 years




1.Emit light actively and reflect light passively making stronger visual impact feeling


2.High impact resistance, friction resistance ,corrosion resistance


3.Easy installation, free maintenance



Item

Other Supplier

OWLEYE

Battery

Usual Ni-MH or Ni - Cd battery, charge and discharge less than 500times. Short lifetime


High quality Ni-MH, charge and discharge more than 700times,resist high/low temperature

Solar cell

Most use B or C -grade,even scrap piece solar cell which be low efficiency and short lifetime

Only use A-grade and high - efficiency monocrystalline silicon solar cell which the conversion efficiency of light to electricity is as high as 19.9%.

Material

Normal plastic


Bullet-proof strong PC

Reflector

No reflector or brightness is not up to the standard

Optical design high bright reflector which high impact resistance, friction resistance,high bright

Installation introduction
1.Before installation ,you must isolate the working place with road and make sure safety .
2.Determine the location of the installation, Then clean the position   . Make sure the installation

position dry.
3.Ensure that the location of the installation level off, can not be installed on cracks and uneven

road surface.
4.Glue the road stud .Ensure enough glue, the road stud bottom and pavement without gap, if

there is a gap, the road stud will be easy broken with car and truck go over it .

Full of glue Even have screw hole
It have to full of glue


5. Confirm product type: Without screw hole or With screw hole
Without screw hole
●Ensure the right direction,Paste directly;
●If the glue is too much, it must be clean; Don’t cover the glue on reflector.


With screw hole
● The location of screw holes is determined by measuring distance positioning method and marked in the installation position; Normally the 2 screw hole centre distance 92mm
●Glue the road stud base and then screw it on the location ;
●Ensure the right direction.If the glue is too much, it must be clean; Don’t cover the glue on reflector.


6. Checking within two hours after installation, ensure that all of the road stud no upside, loaded askew.
7. Installation after 6 hours, you can removing isolation facilities.


Notes
●Suggest to use without screw hole solar road stud on road .With screw hole only use for Vertical       position
●Please install it where it is not easy to be run over by vehicles. Especially not in the middle of the road





1. Quality assurance

Guangzhou Owleye Optoelectronic Technology Co.,Ltd. focus on the research,

production,development and application of road traffic safety produts. Specialize in

producing the high quality solar road stud and other road safety products for many

years,please be free to purchase


2.Package

100pcs/ctn    N.W. 16kg      G.W. 16.8kg      Ctn size:38*23*23.5cm


3. For shipping

Before knowing your destination and shipping way,all our quotation is EXW price,if you have

more requirements or want to know more about shipping ,please contact with sales


4. About after-sale service

Warranty is 1 year(non human reason). Just need to show the Contract or Proforma invoice


5.  About service consultation

Tel: 020-39218706

Welcome your inquiry and nice long term cooperation,will make you satisfied

Purchase:PC Solar road stud
Contact
Mobile
Email
describe your
procurement intention
Identifying code