Products
recommended product
Contact
Guangzhou Owleye
Optoelectronic
Technology Co.,Ltd.
Tel： 86-20-39218706
Fax： 86-20-39218705
Email： owleye@aliyun.com
Add： Block 1,Tian'an Hi-tech
Industrial Plaza 301,Panyu
Hi-tech Ecological Park,
No.555,Panyu North Avenue,
Panyu District,Guangzhou,
Guangdong,China.
Aluminum solar road stud
Your position: Home > Products > Solar Road Stud
Aluminum solar road stud
High load bearing aluminum solar road stud
Item No.：SRSA11
Description：
Perfect design, high load-bearing,high impact resistance;
High intensity light can break through rain and fog at night
- Content
- Specification
- Advantage
- Comparison
- Installation
- Application
- Purchase
Product introduction:
Solar road stud is one of the road studs,usually installed follow the road marking line, is used for indicating the road direction at night or rainy or foggy days.It is composed of shell , reflector,solar panel, LED and circuit board and so on.
It flash or be steady light at night actively, doesn’t depend on car light,make more longer visible distance,more clear visual feeling to driver,make driving more safe.
Size: 132*130*22mm(flat or with shank 50mm)
Colour: Red/Yellow/White/Blue/Green
Light mode: Flash or Constant light
Auto-light control: 300--900lux
Full charge time: 12hours (under 100,000lux)
Working time: Flash > 120h, Constant>120h
Water-proof: IP68
Using temperature:-20℃～80℃
Load-bearing: >370kN
Visual distance: >800meters
Warranty: 1 year
Service life: 5 years
1.Emit light actively and reflect light passively making stronger visual impact feeling
2.Perfect design, high load-bearing, high impact resistance, friction resistance ,corrosion resistance
3.Easy installation, free maintenance, 5 - year service life
| Item |
Other Supplier |
OWLEYE |
|
Battery |
Ni-MH or Ni - Cd battery, charge and discharge less than 500times. Short lifetime |
Special made Li-ion batter, charge and discharge more than 2000times,really more 5 years lifetime |
|
Solar cell |
Most use B or C -grade,even scrap piece solar cell which be low efficiency and short lifetime |
Only use A-grade and high - efficiency monocrystalline silicon solar cell which the conversion efficiency of light to electricity is as high as 19.9%.
|
|
Material
|
Recycled aluminum, low density ,bad performance,load bearing less than 15 tons
|
International standard GB-ADC10 Aluminum，good performance,load bearing more 37tons |
|
Reflector |
Brightness is not up to the standard |
Optical design high bright reflector which high impact resistance, friction resistance |
1.Before installation ,you must isolate the working place with road and make sure safety .
2.Determine the location of the installation, Then clean the position . Make sure the installation position dry.
3.Ensure that the location of the installation level off, can not be installed on cracks and uneven road surface.
4.Glue the solar road stud .Ensure enough glue, the road stud bottom and pavement without gap, if there is a gap, the road stud will be easy broken when vehicle go over it .
Wrong Wrong Correct(full glue)
5. Confirm product type: Without shank or With shank
Without shank
●Ensure the right direction , Paste directly;
●If the glue is too much, it must be clean; Don’t cover the glue on reflector.
With shank
●One shank open the necessary holes with Diameter:25mm , Depth : 55mm;Two shank open 2holes with hole centre distance is 55mm
●Dry the holes with a blowtorch and clean all the structure;
●Pour the glue into the gule ,get to three quarters of the hole;
●Set the market into the hole;
●Ensure the right direction.If the glue is too much, it must be clean; Don’t cover the glue on reflector.
7. Installation after 6 hours, you can removing isolation facilities.
Notes
● Suggest to use 2 shank solar road stud if you install in the place that vehicle go over it frequently
1. Quality assurance
Guangzhou Owleye Optoelectronic Technology Co.,Ltd. focus on the research,
production,development and application of road traffic safety produts. Specialize in
producing the high quality solar road stud and other road safety products for many
years,please be free to purchase
2.Package
Flat bottom 20pcs/ctn N.W. 10.84kg G.W. 12.34kg Ctn size:28.5*29*16cm
With one shank 20pcs/ctn N.W. 11.42kg G.W. 12.92kg Ctn size:53.5*43*16cm
With two shank 20pcs/ctn N.W. 11.94kg G.W. 13.44kg Ctn size:53.5*43*16cm
3. For shipping
Before knowing your destination and shipping way,all our quotation is EXW price,if you have
more requirements or want to know more about shipping ,please contact with sales
4. About after-sale service
Warranty is 1 year(non human reason). Just need to show the Contract or Proforma invoice
5. About service consultation
Tel: 020-39218706
Welcome your inquiry and nice long term cooperation,will make you satisfied
